Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission Mount Bracket & Bolts (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Position the transaxle mount bracket (2) to the transaxle.
CAUTION: Refer to FASTENER NOTICE .
Install the transmission mount bracket bolts (1).
Tightening torque

Tighten the nuts to 55 N.m (41 lb ft) .
Install the left transaxle mount. Refer to INSTALLATION PROCEDURE .
Install the left engine splash shield. Refer to ENGINE SPLASH SHIELD REPLACEMENT - LEFT SIDE .
Remove the transaxle stand.
Lower the vehicle.