Low and Reverse Clutch Piston Removal

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FRONT INTERNAL GEAR AND LOW AND REVERSE CLUTCH ASSEMBLY REMOVAL .

Fig 1: Identifying Low & Reverse Clutch Spring Retaining Ring

Courtesy of SUZUKI OF AMERICA CORP.

Remove the low and reverse clutch spring retaining ring (514) from the transmission case assembly.
Remove the low and reverse clutch spring assembly (513).

Fig 2: Identifying Low & Reverse Clutch Piston
Courtesy of SUZUKI OF AMERICA CORP.

WARNING: Wear safety glasses when using compressed air in order to prevent eye injury.
While rotating the low and reverse clutch piston (511) by hand, apply compressed air into the oil passage located in the side of the transmission case and remove the low and reverse clutch piston assembly.
Remove the inner seal (510) and the outer seal (512) from the piston.