Driver Seat Cushion Heater and Passenger Seat Cushion Heater Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Driver Seat Cushion Heater & Passenger Seat Cushion Heater Components

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENTS REFERENCE

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to FRONT SEAT REPLACEMENT - BUCKET .
1	Front Seat Recliner Handle Tip: Pull firmly forward on the handle to remove.
2	Front Seat Outer Adjuster Finish Cover Refer to FRONT SEAT CUSHION OUTER TRIM PANEL REPLACEMENT (NON FOLD FLAT) and FRONT SEAT CUSHION OUTER TRIM PANEL REPLACEMENT (FOLD FLAT) .
3	Front Seat Belt Buckle Refer to FRONT SEAT BELT BUCKLE REPLACEMENT .
4	Front Seat Inner Adjuster Finish Panel Refer to FRONT SEAT CUSHION INNER TRIM PANEL REPLACEMENT (NON FOLD FLAT) and FRONT SEAT CUSHION INNER TRIM PANEL REPLACEMENT (FOLD FLAT) .
5	Front Seat Lumbar Support Actuator Knob Tip: Remove the lumbar knob by pulling firmly on the knob.
6	Front Seat Cushion Cover Refer to FRONT SEAT CUSHION COVER AND PAD REPLACEMENT .
7	Front Seat Heater Element Tip: Disconnect the electrical connector and gently pull on the heater element to remove the element from the seat foam. Be careful not to damage the foam pad.