Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Front brake caliper bleeder plug | 7 | 0.7 | 5.0 |
| Rear brake caliper bleeder plug | 8 | 0.8 | 6.0 |
| Brake pipe flare nut for M10 | 16 | 1.6 | 12.0 |
| Brake pipe flare nut for M12 | 19 | 1.9 | 14.0 |
| Master cylinder fixing nut | 18 | 1.8 | 13.0 |
| Booster attaching nut | 13 | 1.3 | 9.5 |
| Clevis pin lock nut | 26 | 2.6 | 19.0 |
NOTE:
The specified tightening torque is also described in the following.
FRONT BRAKE HOSE/PIPE CONSTRUCTION
MASTER CYLINDER COMPONENTS
BRAKE BOOSTER COMPONENTS
FRONT BRAKE HOSE/PIPE CONSTRUCTION
MASTER CYLINDER COMPONENTS
BRAKE BOOSTER COMPONENTS
Reference:
For the tightening torque of fastener not specified in this information, refer to FASTENER INFORMATION .