LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Specifications >> Tightening Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Torque Specifications

CAUTION: For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATION

Fastening part Tightening torque Note
N.m kgf-m lbf-ft
Door latch screw 5.0 0.5 4.0 Front Door Lock Assembly Removal and Installation 
Rear Door Lock Assembly Removal and Installation 
Door latch striker screw 10 1.0 7.5 Front Door Lock Assembly Removal and Installation 
Rear end door latch bolt 10 1.0 7.5 Rear Door Lock Assembly Removal and Installation 
Rear end door striker screw 24 2.4 17.5 Rear Door Lock Assembly Removal and Installation 
NOTE: The specified tightening torque is also described in the following.
FRONT DOOR LOCK ASSEMBLY COMPONENTS 
REAR DOOR LOCK ASSEMBLY COMPONENTS 
REAR END DOOR LOCK ASSEMBLY COMPONENTS 

Reference: 

For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .