LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Automatic Transmission) >> Diagnostic Information and Procedure >> DTC P0962, P0963, P0966, P0967, P0970 or P0971 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the 22-way automatic transmission (AT) wiring harness connector (C2) at the TCM.
  2. Test for 5-8 ohms of resistance between the PC solenoid high control circuit terminal and low control circuit terminal.
    • If not within the specified range
    • Remove the appropriate solenoid and test for 4-8 Ω of resistance.
      • If not within the specified range, replace the valve body assembly.
    • Replace the AT wiring harness, refer to WIRING HARNESS REMOVAL  procedure and WIRING HARNESS INSTALLATION ] procedure.
  3. Replace the TCM, refer to TRANSMISSION CONTROL MODULE REMOVAL  and TRANSMISSION CONTROL MODULE INSTALLATION  procedure.
scientia non olet · About LEMON Manuals