Rear Seat Number 2 Back Cushion Cover and Pad Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat No. 2 Back Cushion Cover & Pad

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENTS REFERENCE

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to REAR NUMBER 2 SEAT REPLACEMENT . Remove the rear seat back cushion finish panel. Refer to REAR SEAT NUMBER 2 BACK CUSHION PANEL REPLACEMENT . Remove the rear seat head restraint. Refer to REAR SEAT NUMBER 2 HEAD RESTRAINT REPLACEMENT . Remove the rear seat head restraint guides. Refer to REAR SEAT NUMBER 2 HEAD RESTRAINT GUIDE REPLACEMENT . Remove the rear seat back recliner handle. Refer to REAR SEAT RECLINER HANDLE REPLACEMENT (REAR NO. 2) and REAR SEAT RECLINER HANDLE REPLACEMENT (REAR NO. 1) . Remove the rear seat back recliner cover. Refer to REAR SEAT BACK RECLINER COVER REPLACEMENT (INNER) and REAR SEAT BACK RECLINER COVER REPLACEMENT (OUTER) . Remove the rear seat back cushion outer cover.
1	Rear Seat No. 2 Back Pivot Bolt CAUTION: Refer to FASTENER NOTICE . Tightening torque 2 N.m (18 lb ft)
2	Rear Seat No. 2 Back Cushion Cover Tip: Disconnect the seat back cushion cover j-channel from the seat back cushion frame.
3	Rear Seat No. 2 Back Cushion Pad