A/T System Check: Notes

Refer to the following items for the details of each step.

Step	Action	YES	NO
1	Customer complaint analysis  Perform customer complaint analysis. Was customer complaint analysis performed according to instruction?	Go to Step 2.	Perform customer complaint analysis.
2	DTC/Freeze frame data check, record and clearance  Check for DTC (including pending DTC). Is there any DTC(s)?	Print DTC and freeze frame data or write them down and clear them by referring to DTC CLEARANCE . Go to Step 3.	Go to Step 4.
3	Visual inspection  Perform visual inspection. Is there any faulty condition?	Repair or replace malfunction part. Go to Step 11.	Go to Step 5.
4	Visual inspection  Perform visual inspection. Is there any faulty condition?	Repair or replace malfunction part. Go to Step 11.	Go to Step 8.
5	Trouble symptom confirmation  Confirm trouble symptom. Is trouble symptom identified?	Go to Step 6.	Go to Step 7.
6	Rechecking and record of DTC/Freeze frame data  Recheck for DTC and freeze frame data referring to DTC CHECK . Is there any DTC(s)?	Go to Step 9.	Go to Step 8.
7	Rechecking and record of DTC/Freeze frame data  Recheck for DTC and freeze frame data referring to DTC CHECK . Is there any DTC(s)?	Go to Step 9.	Go to Step 10.
8	A/T basic check and A/T trouble diagnosis  Check and repair according to A/T BASIC CHECK  and A/T SYMPTOM DIAGNOSIS . Are check and repair complete?	Go to Step 11.	Check and repair malfunction part(s). Go to Step 11.
9	Troubleshooting for DTC  Check and repair according to applicable DTC diag. flow. Are check and repair complete?	Go to Step 11.	Check and repair malfunction part(s). Go to Step 11.
10	Check for intermittent problem  Check for intermittent problem. Is there any faulty condition?	Repair or replace malfunction part(s). Go to Step 11.	Go to Step 11.
11	Final confirmation test  Clear DTC if any. Perform final confirmation test. Is there any problem symptom, DTC or abnormal condition?	Go to Step 6.	End.