A/T Basic Check
This check is important for troubleshooting when TCM has detected no DTC and no abnormality has been noted in visual inspection. Follow the flow carefully.
A/T BASIC CHECK - DTC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "A/T System Check" preformed? | Go to Step 2. | Go to A/T SYSTEM CHECK . |
| 2 | Road test
Is it OK? |
Go to Step 3. | Repair or replace defective part. |
| 3 | Manual road test
Is it OK? |
Go to Step 4. | Repair or replace defective part. |
| 4 | Engine brake test
Is it OK? |
Go to Step 5. | Repair or replace defective part. |
| 5 | Stall test
Is it OK? |
Go to Step 6. | Repair or replace defective part. |
| 6 | Time lag test
Is it OK? |
Go to Step 7. | Repair or replace defective part. |
| 7 | Line pressure test
Is it OK? |
Go to Step 8. | Repair or replace defective part. |
| 8 |
Is trouble identified? |
Repair or replace faulty parts. | Go to Step 9. |
| 9 | 1) Proceed to "TROUBLE DIAGNOSIS 2 " in A/T Symptom Diagnosis
. Is trouble identified? |
Repair or replace faulty parts. | Proceed to "TROUBLE DIAGNOSIS 3 " in A/T Symptom Diagnosis . |