Control Valve Body Cover Installation

Fig 1: Identifying Control Valve Body Cover Components

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENT NAME REFERENCE

Callout	Component Name
1	Control Valve Body Cover Wiring Connector Hole Seal Tip: Holes in the seal must face down.
2	Control Valve Body Cover Assembly Gasket
3	Control Valve Body Cover Assembly
4	Control Valve Body Cover Bolt M6 x 30 (Qty: 12) CAUTION: Refer to FASTENER NOTICE . Procedure Tighten in sequence. Tightening torque 12 N.m (9 lb ft).
5	Control Valve Body Cover Stud M6 x 30 (Qty: 2) Procedure Tighten in sequence. Tightening torque 12 N.m (9 lb ft).