Circuit/System Verification

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, observe the scan tool Driver Door Open Sw. parameter while opening and closing the driver door. The reading should change between Open and Closed.
- If the Driver Door Open Sw. parameter does not change between Open and Closed, refer to DOOR AJAR INDICATOR MALFUNCTION .
Observe the scan tool Passenger Door Open Sw. parameter while opening and closing the front passenger door. The reading should change between Open and Closed.
- If the Passenger Door Open Sw. parameter does not change between Open and Closed, refer to DOOR AJAR INDICATOR MALFUNCTION .
If all scan tool parameters test normal, refer to the appropriate diagnostic procedure listed below.
- COURTESY LAMP CIRCUIT TEST
- INADVERTENT POWER COURTESY LAMPS CIRCUIT TEST