Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | CHECK DTC WITH TCM Check DTC with TCM. Refer to [OBD-II DIAGNOSTIC TROUBLE CODE (DTC) ] OK or NG |
GO TO 2. | Perform trouble shooting relevant to DTC indicated. |
| 2 | CHECK DTC WITH "ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)" Refer to [DIAGNOSIS AND REPAIR WORKFLOW ] or [DIAGNOSIS AND REPAIR WORKFLOW ]. OK or NG |
GO TO 3. | Repair or replace. |
| 3 | CHECK COMBINATION METER FUNCTION Refer to [DIAGNOSIS AND REPAIR WORKFLOW: METER, WARNING LAMP AND INDICATOR ] |
INSPECTION END |