Inspection After Installation

Check that the accelerator pedal moves smoothly within the specified range.

Fig 1: Identifying Accelerator Pedal Applied Stroke - A
Courtesy of SUZUKI OF AMERICA CORP.

Accelerator pedal - total pedal applied stroke "A": 48 mm (1.89 in)
Check that the accelerator pedal smoothly returns to the original position.
Perform an electrical inspection of the accelerator pedal position sensor. Refer to [P0222, P0223 TP SENSOR ] (QR25DE), [P0222, P0223 TP SENSOR ] (VQ40DE).
CAUTION: When the harness connector of the accelerator pedal position sensor is disconnected, perform "Accelerator Pedal Released Position Learning". Refer to [PROCEDURE AFTER REPLACING ECM ] (QR25DE), [PROCEDURE AFTER REPLACING ECM ] (VQ40DE).