Housing O-Ring, Vent Assembly, Drain and Fill Plug Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Housing O-Ring, Vent Assembly, Drain And Fill Plug

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENTS LIST

Callout	Component Name
1	Transfer Case O-Ring Seal
2	Transfer Case Vent Assembly Tip: Replace the vent if damaged or blocked.
3	Drain Plug CAUTION: Refer to COMPONENT FASTENER TIGHTENING NOTICE . Tightening torque 39 N.m (29 lb ft)
4	Fill Plug Tightening torque 39 N.m (29 lb ft)
5	Transfer Case Heat Shield
6	Transfer Case Heat Shield Bolts (Qty: 3) CAUTION: Refer to FASTENER NOTICE . Tightening torque 11 N.m (97 lb in)
7	Transfer Case Bracket
8	Transfer Case Bracket Bolts (Qty: 2) Tip: Tighten the bracket bolts to light assembly torque. Tighten to specification after the transfer case is mounted in the vehicle. Refer to FASTENER TIGHTENING SPECIFICATIONS - TRANSFER CASE - GETRAG 760 .