Fastener Tightening Specifications - Transfer Case - Getrag 760
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Transfer Case Bracket-to-Engine Bolt - Hole 4 | 50 N.m | 37 lb ft |
| Transfer Case Bracket-to-Engine Bolts - Holes 1, 2, and 3 | 23 N.m | 17 lb ft |
| Transfer Case Bracket-to-Transfer Case Bolts - Holes 5 and 6 | 50 N.m | 37 lb ft |
| Transfer Case Drain Plug | 39 N.m | 29 lb ft |
| Transfer Case Fill Plug | 39 N.m | 29 lb ft |
| Transfer Case Half Bolts (Qty: 12) | 29 N.m | 21 lb ft |
| Transfer Case Heat Shield Bolts (Qty: 3) | 11 N.m | 97 lb in |
| Transfer Case Rear Output Drive Gear Nut (Qty: 1) | 235 N.m | 173 lb ft |
| Transfer Case Rear Output Drive Shaft Housing Bolts (Qty: 6) | 29 N.m | 21 lb ft |