LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And A/C >> Repair Instructions >> Recirculation Actuator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying Recirculation Actuator And Screws
G05470631Courtesy of SUZUKI OF AMERICA CORP.
  1. Align the recirculation actuator with the door shaft and rotate into position.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the recirculation actuator screws to the HVAC module.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

  3. Connect the electrical connector to the recirculation actuator.
  4. Cycle the ignition and verify proper operation.
  5. Install the instrument panel upper trim panel. Refer to INSTRUMENT PANEL UPPER TRIM PANEL REPLACEMENT .
scientia non olet · About LEMON Manuals