Installation Procedure

Fig 1: Identifying Park Brake Warning Lamp Switch Mounting Screw

Courtesy of SUZUKI OF AMERICA CORP.

Align the park brake warning lamp switch locating tab to the locating hole on the park brake lever assembly.
Install the switch to the park brake lever.
CAUTION: Refer to FASTENER NOTICE .
Install the park brake warning lamp switch mounting screw (1).
Tightening torque

Tighten the screw to 4 N.m (35 lb in).
Connect the park brake warning lamp switch electrical connector (2).
Install the front floor console. Refer to CONSOLE REPLACEMENT .
Enable the SIR system. Refer to SIR DISABLING AND ENABLING .
Verify correct park brake warning lamp operation.