Installation Procedure

Fig 1: Installing Rear Door Window Belt Inner Sealing Strip

Courtesy of SUZUKI OF AMERICA CORP.

Install the window by sliding the window into the door through the outside door belt opening.
Install the window into the primary window run channels and position into the regulator guide plate.

Fig 2: Installing Window Into Primary Window Run Channels
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .
Install the window run channel bolts.
Tightening torque

Tighten the bolts to 8 N.m (71 lb in).
Install the rear door water deflector. Refer to REAR SIDE DOOR WATER DEFLECTOR REPLACEMENT .

Fig 3: Installing Rear Door Water Deflector
Courtesy of SUZUKI OF AMERICA CORP.
Install the inner belt seal. Refer to REAR DOOR WINDOW BELT INNER SEALING STRIP REPLACEMENT .
Install the rear inner door trim panel. Refer to REAR SIDE DOOR TRIM PANEL REPLACEMENT .
Install the door frame appliques. Refer to FRONT DOOR FRAME APPLIQUE REPLACEMENT .
Operate the window to inspect the operation.