Knuckle and Hub Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Remove the wheel.
Remove the caulking nut and washer.

Fig 1: Identifying Caulking Nut And Washer
Courtesy of SUZUKI OF AMERICA CORP.
Remove the outer tie rod. Refer to OUTER TIE ROD REMOVAL .
Disconnect the control arm ball joint. Refer to BALL JOINT DISASSEMBLY .
Remove the brake caliper. Refer to CALIPER REMOVAL .
Remove the detent screw from the brake disc. Remove the disc.

Fig 2: Identifying Detent Screw & Brake Disc
Courtesy of SUZUKI OF AMERICA CORP.
Remove the splash shield. Refer to SPLASH SHIELD REMOVAL .

Fig 3: Identifying Splash Shield & Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the front strut bolts.
Remove the knuckle, hub assembly.

Fig 4: Identifying Knuckle & Hub Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Remove the hub bolts from the knuckle and separate the hub from the knuckle.

Fig 5: Identifying Hub, Bolts & Knuckle
Courtesy of SUZUKI OF AMERICA CORP.