Shift Control Lever Assembly Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the floor console. Refer to FLOOR CONSOLE REMOVAL AND INSTALLATION .
Disconnect the electrical switch connectors.

Fig 1: Identifying Electrical Switch Connectors
Courtesy of SUZUKI OF AMERICA CORP.
Remove the shift control cable adjuster pinch nut.
Remove the cable from the bracket.

Fig 2: Identifying Shift Control Cable Adjuster Pinch Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the bolts and nuts holding the shift control assembly to the floor panel.
Remove the shift control assembly.

Fig 3: Identifying Shift Control Assembly Mounting Bolts And Nuts
Courtesy of SUZUKI OF AMERICA CORP.