LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Transmission) >> Repair Instruction >> Shift Control Lever Assembly Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Control Lever Assembly Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift control assembly.

    Tighten: 

    Tighten the shift control assembly mounting bolts and nuts to 8 N.m (71 lb-in).

    Fig 1: Identifying Shift Control Assembly Mounting Bolts And Nuts
    G04717242Courtesy of SUZUKI OF AMERICA CORP.
  2. Install the shift control cable onto the bracket.
  3. Install the shift control cable adjuster pinch nut.

    Tighten: 

    Tighten the shift control cable adjuster pinch nut to 8 N.m (71 lb-in).

    Fig 2: Identifying Shift Control Cable Adjuster Pinch Nut
    G04717244Courtesy of SUZUKI OF AMERICA CORP.
  4. Connect the electrical switch connectors.
  5. Install the floor console. Refer to FLOOR CONSOLE REMOVAL AND INSTALLATION .
  6. Connect the negative battery cable.
    Fig 3: Identifying Electrical Switch Connectors
    G04717245Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals