Shift Control Cable Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Install the shift control cable into the fire wall of the vehicle.
Install the shift control cable onto the transaxle mount.

Fig 1: Identifying Shift Control Cable
Courtesy of SUZUKI OF AMERICA CORP.
Install the shift control cable onto the shift control assembly.
Install the shift control cable adjuster pinch nut.
Tighten:

Tighten the shift control cable adjuster pinch nut to 8 N.m (71 lb-in).

Fig 2: Identifying Shift Control Cable Adjuster Pinch Nut
Courtesy of SUZUKI OF AMERICA CORP.
Install the clip to the shift control cable at the transaxle mount connection.
Install the clip to the select lever connection on the transaxle case.
Adjust the shift control cable. Refer to Shift Control Cable Adjustment .
Connect the negative battery cable.

Fig 3: Identifying Shift Control Cable
Courtesy of SUZUKI OF AMERICA CORP.