Planetary Gear Set Disassembly and Assembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Remove the clutch B/E. Refer to Clutch B Engaged .
Remove the rear sun gear.

Fig 1: Removing Rear Sun Gear
Courtesy of SUZUKI OF AMERICA CORP.
Remove the planetary gear set.

Fig 2: Removing Planetary Gear Set
Courtesy of SUZUKI OF AMERICA CORP.
Remove snap ring from front ring gear.

Fig 3: Removing Snap Ring From Front Ring Gear
Courtesy of SUZUKI OF AMERICA CORP.
Take out rear planetary gear set.

Fig 4: Removing Rear Planetary Gear Set
Courtesy of SUZUKI OF AMERICA CORP.
Remove the axial needle bearing.

Fig 5: Removing Axial Needle Bearing
Courtesy of SUZUKI OF AMERICA CORP.
Take out front gear set with rear ring gear, front sun gear and oil trays.

Fig 6: Removing Front Gear Set With Rear Ring Gear, Front Sun Gear And Oil Trays
Courtesy of SUZUKI OF AMERICA CORP.
Take oil trays and front sun gear off the planetary gear set.
Installation should follow the removal procedure in the reverse order.

Fig 7: Removing Oil Trays And Front Sun Gear From Planetary Gear Set
Courtesy of SUZUKI OF AMERICA CORP.