Park/Neutral Start Switch Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Disconnect the park/neutral position switch electrical connector.
Disconnect the shift control cable and the retaining clip.

Fig 1: Identifying Shift Control Cable And Retaining Clip
Courtesy of SUZUKI OF AMERICA CORP.
Remove the shift lever nut and the shift lever.

Fig 2: Identifying Shift Lever And Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the park/neutral start switch.

Fig 3: Identifying Park/Neutral Start Switch Bolts
Courtesy of SUZUKI OF AMERICA CORP.