LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Transmission) >> Repair Instruction >> Oil Pump Assembly Disassembly and Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump Assembly Disassembly and Assembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pump housing bolts.
  2. Using the plastic hammer. Take out the oil pump housing.

    Installation Notice

    Tighten: 

    Tighten the oil pump housing bolts 10 N.m (89 lb-in).

    Fig 1: Identifying Oil Pump Housing Bolts
    G04717373Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the stator shaft bolts.
    Fig 2: Identifying Stator Shaft Bolts
    G04717374Courtesy of SUZUKI OF AMERICA CORP.
  4. Dismantle the oil pump gear, ring gear.
  5. Installation should follow the removal procedure in the reverse order.
    Fig 3: Identifying Oil Pump Gear And Ring Gear
    G04717375Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals