Left Transaxle Mounting Bracket Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Install the left transaxle mount bracket cage bolts and nut.
Tighten:
- Tighten the left transaxle mount bracket cage bolt (a) to 110 N.m (81 lb-ft).
- Tighten the left transaxle mount bracket cage bolt (b) to 65 N.m (48 lb-ft).
- Tighten the left transaxle mount bracket cage nut (c) to 65 N.m (48 lb-ft).
  
  Fig 1: Identifying Left Transaxle Mount Bracket Cage Bolts And Nut
  Courtesy of SUZUKI OF AMERICA CORP.
Install the left transaxle mounting bolts to 48 N.m (35 lb-ft).

Fig 2: Identifying Left Transaxle Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the engine support fixture DW110-060.
Install the battery. Refer to BATTERY AND BATTERY TRAY REMOVAL AND INSTALLATION .

Fig 3: Identifying Engine Support Fixture DW110-060
Courtesy of SUZUKI OF AMERICA CORP.