Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Turbine speed is greater than 500 RPM.
System voltage is too high or too low.
CAN transmitting wiring harness shortage or open.
TCM or ECM is defective.
Immediately after the above condition occurs.