LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Seats) >> Repair Instructions >> Front Seat Trim Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seat Trim Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  1. Install the front seat trim with the screws.

    Tighten: 

    Tighten the front seat trim screws to 12 N.m (106 lb-in.).

  2. Install the recliner lever with the screw.

    Tighten: 

    Tighten the seat recliner lever screw to 12 N.m (106 lb-in.).

  3. Install the front bucket seat in the vehicle. Refer to Front Bucket Seat Installation .
    Fig 1: Removing/Installing Recliner Lever And Front Seat Trim
    G04720521Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals