LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Seats) >> Repair Instructions >> Front Bucket Seat Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Bucket Seat Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat.
  2. Connect the electrical connectors.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  3. Install the bolts into the front portion of the front seat.

    Tighten: 

    Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).

  4. Install the plastic caps.
    Fig 1: Removing/Installing Plastic Caps And Bolts Front Portion Of Front Seat Of Floor
    G04720502Courtesy of SUZUKI OF AMERICA CORP.
  5. Install the bolts into the rear portion of the front seat.

    Tighten: 

    Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).

  6. Install the plastic caps.
  7. Connect the negative battery cable.
    Fig 2: Removing/Installing Plastic Caps And Bolts Rear Portion Of Front Seat Of Floor
    G04718282Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals