LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Seats) >> Repair Instructions >> Front Bucket Seat Track Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Bucket Seat Track Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cushion onto the seat track.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  2. Install the seat track to the seat cushion with the seat cushion bolts.

    Tighten: 

    Tighten the front seat cushion bolts to 12 N.m (106 lb-in.).

  3. Install the seat trim. Refer to Front Seat Trim Installation .
  4. Install the seatback. Refer to Front Seatback Installation .
    Fig 1: Removing/Installing Seat Track And Seat Cushion
    G04720511Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals