Control Assembly Knob Lighting Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the heating and ventilation system control assembly. Refer to Control Assembly Removal .

Fig 1: Identifying Control Assembly Knob Bulb
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the small connector to the vacuum control switch on the rear of the assembly case.
Separate the control assembly case halves.
Turn the bulb holder to the left and pull out the bulb.

Fig 2: Identifying Control Assembly Knob Bulb
Courtesy of SUZUKI OF AMERICA CORP.