LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Heater And Ventilation) >> Repair Instructions >> Control Assembly Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Assembly Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the audio system trim plate. Refer to INSTRUMENT CLUSTER TRIM PANEL REMOVAL .
  3. Remove the 4 controller retaining screws.
  4. Pull out the controller to provide clearance for removal of the temperature control cable.
    Fig 1: Identifying Temperature Control System Trim Plate
    G04720766Courtesy of SUZUKI OF AMERICA CORP.
  5. Disconnect the temperature control cable by gently prying the cable eyelet from the post on the controller. Unsnap the cable housing from the mechanical slide. Note the location of the cable and the housing for ease of installation.
  6. Disconnect the electrical connectors.
  7. Remove the vacuum hose connection block from the mode control switch.
    Fig 2: Identifying Temperature Control Cable Eyelet
    G04720763Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals