LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Grand Vitara Base, AWD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnostic Information and Procedures >> TCM Power and Ground Circuit Check >> Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCM Power and Ground Circuit Check: Troubleshooting

TROUBLESHOOTING TABLE

Step Action YES NO
1  Check TCM back-up power circuit 
  1. Disconnect TCM connector with ignition switch OFF.
  2. Check for proper connection to TCM at "E92-24" terminal.
  3. If OK, check voltage at terminal "E92-24" of disconnected TCM connector.

Is it 10 - 14 V? 		 Go to Step 2. "WHT" circuit open or shorted to ground.
2  Check TCM power circuit 
  1. Disconnect TCM connector with ignition switch OFF.
  2. Check for proper connection to TCM at "E92-6" terminal.
  3. If OK, turn ignition switch ON and check voltage at terminal "E92-6" of disconnected TCM connector.

Is it 10 - 14 V? 		 Go to Step 4. Go to Step 3.
3  Check A/T relay operation 
  1. Check A/T relay operation by referring to A/T RELAY INSPECTION .

Is check result satisfactory? 		 "BLK/WHT", "WHT/GRN", or "BLK" circuit for power supply open. Replace A/T relay included in power integration No.2 in main fuse box.
4  Replace A/T relay included in power integration No.2 in main fuse box  .
  1. Turn ignition switch OFF.
  2. With TCM connectors disconnected, check for proper connection to TCM at "E92-1"/"E92-23" terminal.
  3. If OK, check resistance between "E92-1"/"E92-23" terminal of disconnected TCM connector and body ground.

Is continuity indicated? 		 TCM power and ground circuits are in good condition. "BLK" circuit for TCM ground open.
scientia non olet · About LEMON Manuals