A/T Relay Inspection

Disconnect negative cable at battery.
Remove integration relay No.2 (1) from fuse box No.2 (2).

Fig 1: Identifying Integration Relay No. 2 & Fuse Box No. 2
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no continuity between terminals "E41-1" and "E38-8".
If there is continuity, replace relay.
Connect battery positive (+) terminal to terminal "E38-6" of relay. Connect battery negative (-) terminal to terminal "E38-7" of relay. Check for continuity between terminal "E41-1" and "E38-8". If there is no continuity when relay is connected to the battery, replace integration relay No.2.

Fig 2: Checking Continuity Between Terminals "E41-1" & "E38-8"
Courtesy of SUZUKI OF AMERICA CORP.