Forward Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FORWARD SENSOR INSPECTION

CAUTION: Proper operation of forward sensor requires sensor be rigidly attached to vehicle structure and that the arrow on sensor bracket be pointing toward the front of the vehicle.

Check that none of the following faulty conditions exists.
- Bend or deformity of sensor bracket (1) and front panel.
- Foreign matter on mating surface of sensor bracket (1) with sensor or excessive rust.
  
  Fig 1: Identifying Sensor Bracket
  Courtesy of SUZUKI OF AMERICA CORP.
Apply thread lock cement to mounting bolts thread. Install forward sensor (1) on front panel (2) and tighten mounting bolts (3) to specified torque.
"A": Thread lock cement 99000-32100

Tightening torque

Forward sensor mounting bolt a: 10 N.m (1.0 kg-m, 7.5 lb-ft)

Fig 2: Identifying Forward Sensor, Mounting Bolts And Front Panel
Courtesy of SUZUKI OF AMERICA CORP.
Connect forward sensor connector by pushing connector till click is heard from it.
Connect negative cable at battery.
Enable air bag system referring to ENABLING AIR BAG SYSTEM .