Enabling Air Bag System

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to LOCK position and remove key.
Connect yellow connector (1) of contact coil and combination switch assembly by pushing connector till click is heard from it.

Fig 1: Identifying Yellow Connector Of Contact Coil And Combination Switch Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Connect yellow connector (1) of passenger air bag (inflator) module by pushing connector till click is heard from it.

Fig 2: Identifying Yellow Connector Of Passenger Air Bag Module
Courtesy of SUZUKI OF AMERICA CORP.
Install glove box.
Install "AIR BAG" fuse to fuse box.
Turn ignition switch to ON position and verify that "AIR BAG" warning lamp flashes 6 times and then turns OFF.
If it does not operate as described, perform AIR BAG DIAGNOSTIC SYSTEM CHECK .