HVAC Control Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Refer to HVAC CONTROL MODULE AND ITS CIRCUITS INSPECTION : Manual Type.

Refer to HVAC CONTROL MODULE AND ITS CIRCUITS INSPECTION : Automatic Type.

Install in reverse order of removal procedure, noting the following item.
- When installing center garnish, align rubber bushing (1) with BCM installation hole (2) of instrument panel member (3).
  
  Fig 1: Identifying Rubber Bushing, BCM Installation Hole & Instrument Panel Member
  Courtesy of SUZUKI OF AMERICA CORP.
- For vehicle with automatic A/C system, fit aspirator hose in inside air temperature sensor duct (1) of HVAC control module (2).
  
  Fig 2: Identifying Air Temperature Sensor Duct And HVAC Control Module
  Courtesy of SUZUKI OF AMERICA CORP.
- Enable air bag system.
  Refer to ENABLING AIR BAG SYSTEM.