Automatic Transmission Assembly Dismounting And Remounting: Installation

WARNING: This page is about a different variant/trim than selected.

For remounting, reverse dismounting procedure noting the following points.

Tighten each bolts and nuts referring to AUTOMATIC TRANSMISSION UNIT COMPONENTS
Tighten drive plate bolt No. 1 (1) first and then tighten drive plate bolts No. 2 (2).

Fig 1: Identifying Drive Plate Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Set each clamp for wiring securely.
Fill A/T fluid referring to A/T FLUID CHANGE .
Connect battery and check function of engine and transmission.