LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Verona S >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Diagnostic Information and Procedures >> DTC P1868 EDS 6 Output Shorted to Power >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

DTC P1868 TROUBLESHOOTING CHART

Step Action Value(s) Yes No
1 Perform an On-Board Diagnostic (OBD II) System Check.
Is the check completed?		 - Go to Step 2. Go to "ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK ".
2
  1. Install the scan tool.
  2. Turn the ignition ON, with the engine OFF.
  3. Select "Actuating" on the scan tool.
  4. Actuate EDS 6 ON/OFF.

Does the EDS 6 change ON/OFF?		 ON/OFF Go to "DIAGNOSTIC AIDS ". Go to Step 3.
3
  1. Remove the oil pan.
  2. Disconnect the wiring connector of EDS 6.
  3. Turn the ignition ON, with the engine OFF.
  4. Measure the voltage terminal 2 of the EDS 6 wiring connector.

Is the voltage within the values shown?		 11 - 14V Go to Step 4. Go to Step 5.
4 Repair the internal line (EDS 6) for a short to power.
Is the repair complete?		 - System OK -
5 Replace the EDS 6.
Is the replacement complete?		 - Go to Step 6. -
6
  1. Check if any DTCs are set.
  2. Are any DTCs displayed that have not been diagnosed?
 - Go to applicable DTC IDENTIFICATION . System OK
scientia non olet · About LEMON Manuals