LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Verona S >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Diagnostic Information and Procedures >> DTC Identification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Identification

DTC IDENTIFICATION

DTC Description Indication Default Action
P0562 System Voltage Low MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0563 System Voltage High MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0601 Internal Control Module Memory Checksum Error MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0603 Internal Control Module Keep Alive Memory (KAM) Error MIL ON
  • The TCM will record operating conditions at he time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0604 Internal Control Module Random Access Memory (RAM) Error MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0606 Transaxle Control Module Processor Fault MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P0703 Brake Switch Circuit Malfunction No Change
  • TCM assume that the brake light always active.
  • Open lock up clutch.
P0705 Transmission Range Sensor Circuit Malfunction (PRNDL Input) MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
P0710 Transmission Fluid Temperature Out of Range Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 140 °F (60 °C).
  • No influence at vehicle running.
P0711 Transmission Fluid Temperature Sensor Circuit Range/ Performance Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 140 °F (60 °C).
  • No influence at vehicle running.
P0712 Transmission Fluid Temperature Sensor Circuit Shorted to Ground Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C.
  • No influence on drivability.
P0713 Transmission Fluid Temperature Sensor Circuit Shorted to Power and open Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C.
  • No influence on drivability.
P0715 Input Speed Sensor Circuit Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock up clutch.
P0716 Input Speed Sensor Circuit Range/ Performance MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock up clutch.
P0717 Input Speed Sensor Circuit No Signal MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock up clutch.
P0720 Output Speed Sensor Circuit Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
P0721 Output Speed Sensor Circuit Range/ Performance MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
P0722 Output Speed Sensor Circuit No Signal MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Vehicle running remains actual gear.
  • Open lock up clutch.
P0725 Engine Speed Input Circuit Malfunction No Change
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
P0726 Engine Speed Input Circuit Range/ Performance Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
P0727 Engine Speed Input Circuit No Signal Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
P0731 Gear 1 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • High line pressure
P0732 Gear 2 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • High line pressure.
P0733 Gear 3 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • High line pressure
P0734 Gear 4 Incorrect Ratio MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • High line pressure.
P0741 TCC (Torque Converter Clutch) Circuit Stuck OFF MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Open lock up clutch.
P0742 TCC (Torque Converter Clutch) Circuit Stuck ON MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Open lock up clutch.
P0781 1 - 2 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 1st gear.
  • Open lock up clutch.
P0782 2 - 3 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 2nd gear.
  • Open lock up clutch.
P0783 3 - 4 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
P1604 Data Check of Internal & Extended Ram Failed MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
P1606 Failure of External Watchdog MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1779 Engine Torque Input Signal (CAN) Malfunction No Change
  • Adjustable value, calculated over the substitute map throttle position, (engine speed, engine torque)
P1791 Throttle Position Input Signal (CAN) Malfunction No Change
  • Adjustable value, calculated over the substitute map throttle position, (engine speed, engine torque)
P1839 EDS3 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1840 EDS3 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1841 EDS3 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1850 Solenoid 1 Output Shorted To Ground Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1851 Solenoid 1 Output Shorted To Power Hold Lamp Flashing
  • Hold lamp will blink.
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
P1852 Solenoid 1 Output Open Hold Lamp Flashing
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1853 Solenoid 2 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1854 Solenoid 2 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1855 Solenoid 2 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1861 EDS4 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1862 EDS4 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1863 EDS4 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1864 EDS5 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1865 EDS5 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1866 EDS5 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1867 EDS6 Output Shorted To Ground MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1868 EDS6 Output Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1869 EDS6 Output Open MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1871 EDS Valve Power Supply Circuit Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
P1874 Solenoid Valve Power Supply Circuit Shorted To Power MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
P1881 2 -1 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
P1883 3-2 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
P1884 4 - 3 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
P1885 3 - 1 Shift Malfunction MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
U0073 CAN Bus OFF Failure MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
U0100 CAN Receive ECM Message Failure MIL ON
  • The TCM will record operating conditions at he time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
U0101 CAN Transmit Message Failure MIL ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
scientia non olet · About LEMON Manuals