Modification Of Main Bearing Oil Clearance And The Bearing Selection Procedure (TS_14_10285R)

WARNING: This page is about the Vitara JLS, 4D Utility, 1.6, which is a different variant/trim than selected.

Publication date: 2005-10-28
Reference number: TS_14_10285R

MODIFICATION OF MAIN BEARING OIL CLEARANCE AND THE BEARING SELECTION PROCEDURE

TECHNICAL SERVICE BULLETIN

Reference Number(s): TS 14 10285R, Date of Issue: October 28, 2005

SUZUKI:	1999~2005 VITARA (SQ420/SQ625L), GRAND VITARA (SQ625W) AND XL-7 (JA627)
SECTION:	Engine

REVISION

Main bearing oil clearance specification and main bearing selection chart in the Service Manual has been updated on the H25 and H27 engines. Please also see attached pages 1 thru 4.

CONDITION

Oil clearance of the main bearings has been modified.

CAUSE

N/A

CORRECTION

The crankshaft main bearing oil clearance for the H25 and H27 engines has been modified as well as the main bearing selection procedure. Please update your service manual according to the following specifications and the eight attached Service Manual pages.

NOTE: This update will reflect in future printings of the service manuals. If the reprint date on the inside back cover of the manual is later than the issue date of this bulletin, the manual will have been corrected.