Steering Wheel: Installation
WARNING: This page is about a different car, the 1996 Suzuki Sidekick and 1995 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
- Center clockspring by gently turning clockspring cover counterclockwise until it stops. Turn clockspring cover clockwise 2 1/2 turns and align alignment arrows on clockspring cover and housing.
- Install steering wheel on steering shaft paying attention to alignment marks and with 2 clockspring lugs fitting into grooves on back of steering wheel. Tighten steering wheel nut to 24 ft. lbs. (33 N.m). Tighten air bag module bolts to 17 ft. lbs. (22 N.m).
- To complete installation, reverse removal procedure. Connect driver's side and passenger's side Yellow air bag connectors. Reinstall AIR BAG fuse. Turn ignition on and ensure AIR BAG warning light flashes 7 times then turns off. If AIR BAG warning light does not operate as described, see AIR BAG RESTRAINT SYSTEM article.
To install, reverse removal procedure. Ensure reference marks line up. Tighten steering wheel nut to 18.5-28.5 ft. lbs. (25-40 N.m). Connect negative battery cable and ensure horn works.