Front End Discriminating Sensor: Installation
WARNING: This page is about a different car, the 1996 Suzuki Swift, 1996 Pontiac Firefly, and 1996 Geo Metro. However, it is still accessible from the selected car via links, so may be relevant.
To install, position sensor in vehicle with arrow pointing toward front of vehicle. Install retaining screws and torque to 49 INCH lbs. (5.5 N.m). Connect front end discriminating sensor connector and re-engage CPA clip. Activate SIR system. See procedures under DISABLING & ACTIVATING AIR BAG SYSTEM .