Service Precautions

Observe these precautions when working with air bag systems:

• Before disconnecting battery cable(s) and disabling air bag system, obtain radio security code from vehicle owner.
• Before installing computer memory saver on vehicles with electronic radio lock, disconnect air bag voltage supply connector. See DISABLING ACTIVATING AIR BAG SYSTEM . Failure to do so may cause air bag activation.
• Disable air bag system before servicing any air bag system or steering column component. See DISABLING ACTIVATING AIR BAG SYSTEM .
• Because of critical operating requirements of system, DO NOT attempt to service any air bag system component.
• DO NOT leave air bag parts unattended. Install air bag parts in vehicle immediately after they are obtained.
• DO NOT use air bag components that have been dropped from heights of approximately 20" or higher.
• DO NOT allow chemical cleaners, oil or grease to contact vinyl covering on air bag unit.
• DO NOT place stickers or covers on steering wheel.
• Disable SRS before performing electric welding on vehicle.
• DO NOT expose air bag unit to temperatures greater than 212°F (100°C).