Holding Fixture Installation

Reference: TORQUE CONVERTER ASSEMBLY REMOVAL .

Special Tool 

DT-48355 Holding Fixture 

J 3289-20 Holding Fixture 

Fig 1: Identifying Vent Hose & Transmission Vent Pipe

Courtesy of SUZUKI OF AMERICA CORP.

1. Remove the vent hose (814).
2. Remove the transmission vent pipe (812).
   Fig 2: Identifying Body Of DT-48355

   Courtesy of SUZUKI OF AMERICA CORP.
3. Install the body of the DT-48355 with the two long bolts (1) to the transaxle.
4. Loosely install the arm and bolt (2) to the DT-48355 body.
   CAUTION: Refer to FASTENER NOTICE .
5. Install the arm with the provided shorter bolt (3) to the transaxle.

   Tightening torque 

   Tighten the DT-48355 to 25 N.m (18 lb ft) starting with bolt (3)  .

6. Install the DT-48355 in the J 3289-20.