LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1988 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Mechanical) >> Repair Instructions >> Engine Rear Mount Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Engine Mount Bracket To Engine Mount Bolt
G04841424Courtesy of SUZUKI OF AMERICA CORP.
CAUTION: Refer to FASTENER NOTICE .
  1. Position engine mount in place and install engine mount bracket to engine mount bolt.

    Tightening torque 

    Tighten the bolt to 50 N.m (38 lb ft)  .

  2. Install the engine mount to frame bolts (1).

    Tightening torque 

    Tighten the engine mount bolts to 50 N.m (38 lb ft)  .

  3. Lower the vehicle.
  4. Remove the engine support. Refer to ENGINE SUPPORT FIXTURE .
  5. Install the air cleaner assembly. Refer to INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals