Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Window Weatherstrip Run Channel Assembly (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Install the window weatherstrip run channel assembly.
1. Starting at the lower rear corner of the window opening, press the weatherstrip run channel onto the door flange.
2. Ensure the channel is fully secured into the upper corners of the door frame.
Install the inner belt seal. Refer to FRONT SIDE DOOR WINDOW BELT INNER SEALING STRIP REPLACEMENT .
Install the front door trim panel. Refer to FRONT SIDE DOOR TRIM PANEL REPLACEMENT .

Fig 1: Identifying Front Door Window Run Channel & Seal (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Install the window run channel seal to the door header flange, starting from the rear corner.
Tightening torque

Tighten the bolts to 8 N.m (71 lb in).
Install the front door window weatherstrip run channel assembly. Refer to INSTALLATION PROCEDURE .
Install the front door frame applique. Refer to FRONT DOOR FRAME APPLIQUE REPLACEMENT .
Install the outside rearview mirror. Refer to INSTALLATION PROCEDURE .
Install the front door window. Refer to INSTALLATION PROCEDURE .