Rear Quarter Lower Trim Panel Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Quarter Lower Trim Panel Assembly & Retainer

Courtesy of SUZUKI OF AMERICA CORP.

REAR QUARTER LOWER TRIM PANEL ASSEMBLY REFERENCE

Callout	Component Name
Preliminary Procedures Remove rear floor storage bin. Refer to REAR STORAGE COMPARTMENT REPLACEMENT . Remove third row seat. Refer to REAR NUMBER 2 SEAT REPLACEMENT . Remove liftgate door sill plate. Refer to LIFTGATE DOOR SILL PLATE REPLACEMENT . Remove the rear carpet retainer. Refer to REAR CARPET RETAINER REPLACEMENT . Remove rear seat #2 seat belt anchor bolt. Refer to SEAT BELT RETRACTOR REPLACEMENT - NO. 2 REAR .
1	Rear Quarter Lower Trim Plug
2	Rear Quarter Lower Trim Panel Screw Tightening torque 2.5 N.m (22 lb in) CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
3	Rear Quarter Lower Trim Panel Clip (Qty: 9)
4	Rear Quarter Lower Trim Panel Retainer (Qty: 5)
5	Rear Quarter Lower Trim Panel Assembly Tip: Disconnect electrical connector.