Seat Belt Replacement - Center Rear

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat Belt Retractor & Seat Nut

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT COMPONENT NAME

Callout	Component Name
Preliminary Procedures Remove the rear seat cushion cover and pad. Refer to REAR SEAT CUSHION COVER AND PAD REPLACEMENT . Remove the sixty percent rear seat back cover and pad. Refer to REAR SEAT BACK CUSHION COVER AND PAD REPLACEMENT (60% SEAT) and REAR SEAT BACK CUSHION COVER AND PAD REPLACEMENT (40% SEAT) .
1	Center Rear Seat Belt Retractor To Seat Bolt CAUTION: Refer to FASTENER NOTICE . Tip: Apply GM P/N 12345382 (Canadian P/N 10953489), Permatex® 24200 or equivalent on all seat belt fasteners prior to installation. Tightening torque 45 N.m (33 lb ft)
2	Center Rear Seat Belt Retractor To Seat Nut Tip: Apply GM P/N 12345382 (Canadian P/N 10953489), Permatex® 24200 or equivalent on all seat belt fasteners prior to installation. Tightening torque 45 N.m (33 lb ft)
3	Center Rear Seat Belt Retractor Tip: Make sure alignment slots are aligned correctly on reinstallation.