Rear Seat Cushion Cover and Pad Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat No. 1 Cushion Cover & Pad (60 Percent Seat Shown, 40 Percent Seat Similar)

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENTS REFERENCE

Callout	Component Name
Preliminary Procedures Remove the rear seat inner recliner cover. Refer to REAR SEAT BACK RECLINER COVER REPLACEMENT (INNER) and REAR SEAT BACK RECLINER COVER REPLACEMENT (OUTER) . Remove the rear seat outer recliner cover. Refer to REAR SEAT BACK RECLINER COVER REPLACEMENT (INNER) and REAR SEAT BACK RECLINER COVER REPLACEMENT (OUTER) . Remove the rear seat latch covers.
1	Rear Seat No. 1 Seat Cushion Cover Disconnect the seat cover j-channel from the seat frame. Remove the seat cushion cover and pad as an assembly from the seat cushion frame.
2	Rear Seat No. 1 Seat Cushion Pad (60 percent seat shown, 40 percent seat similar) Tip: Remove the seat cushion pad from the seat cushion cover.